We – EPG Group the largest gearbox & motors , torque limiter couplings and gears factory in China with 5 diverse branches. For a lot more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828
1. Mixers:
1.1 Automatic Container Mixer
Automatic container mixer is wor ept with constant material trolleys, the container fills the resources and lifted up and connnected tightly with mixing head instantly. The mixing head tilts collectively with the containers, and then get the homogeneous mixing outcome, after finishing mixing as for every location time, and return to unique placement, the entire approach will be managed by PLC
Primary Attributes:
Several removable containers for round procedure
Substantial efficiency
Adopting PLC to comprehend automation
Homogenized combination
No curing granule
Handy for cleansing and servicing
Secure and relaiable procedure
Complex Knowledge:
| Design | Quantity (L) | Output (kg/tank) | Mixing Motor (kw) | Tilting Motor (kw) | Crushing Motor (kw) | Mixing Time (min) | Handle Mode | All round Proportions (MM) |
| FHJ-15 | fifteen | eight | one.five | five-10 | PLC | 750*480*950 | ||
| FHJ-one hundred twenty | one hundred twenty | 60 | 5.five | .two | 5-10 | PLC | 1800*1800*1950 | |
| FHJ-150 | a hundred and fifty | 70 | five.five | .37 | two.2 | five-ten | PLC | 2150*1100*2300 |
| FHJ-three hundred | 300 | 150 | 15 | 3 | two.2 | five-ten | PLC | 2150*1100*2300 |
| FHJ-600 | 600 | three hundred | 22 | 4 | four | five-ten | PLC | 2650*1250*2700 |
| FHJ-1000 | 1000 | 500 | thirty | four | four | five-10 | PLC | 2900*1550*3100 |
| FHJ-2000 | 2000 | a thousand | 45 | five.five | 5.5 | 5-ten | PLC | 3500*2350*3650 |
1.2 High Velocity Pre-Mixer:
Characteristics:
Higher effectiveness & effortless operation
Simple coloration altering, risk-free cleansing
Merged mixing & crushing as a single
Mixing time preseting, brief & homogeneous
Excellent sealing, powder lea ept totally free
Vertical or horizontal sort as optional
Complex Data:
| Product | Volume (L) | Mixing Motor (kw) | Crushing Motor (kw) | Mixing Time (min) | Total Proportions (mm) |
| GHJ-20 | 20 | .fifty five | .37 | 3-five | 700*500*800 |
| GHJ-one hundred | 100 | three | one.5 | 3-five | one thousand*600*900 |
| GHJ-200 | 200 | 5.5 | 3 | 3-five | 1500*900*1400 |
| GHJ-300 | 300 | seven.5 | four | 3-six | 1800*900*1400 |
| GHJ-500 | 500 | fifteen | five.5 | 4-6 | 1800*1300*1800 |
| GHJ-800 | 800 | eighteen.five | 7.5 | four-6 | 1900*1300*2000 |
| GHJ-one thousand | 1000 | 22 | 7.5 | 4-6 | 2300*1400*2000 |
1.3 Double Cone Mixer:
This twin-cone mixer is composed of a rotating container with two cones and two stirrers. This equipment is applicable for powder coating, pharmaceutical, chemical, foodstuff, dyestuff, and other multi-compound resources. It has outstanding result in mixing powders and particles with comparatively very good fluidity. Its barrel is manufactured of stainless steel, which is polished the two inside and outside the house, that includes lovely look and easy procedure.
Technological Data:
| Product | Quantity (L) | Output (kg/tank) | Rotating Motor (kw) | Mixing Motor (kw) | Mixing Time (min) | Total Dimensions (mm) |
| SXH-one hundred | 300 | a hundred and fifty | 1.5 | 1.five | -thirty | 1760*830*2030 |
| SXH-200 | four hundred | two hundred | 1.five | 1.5 | -thirty | 1830*830*2150 |
| SXH-three hundred | 600 | three hundred | 2.2 | one.five | -thirty | 1980*a thousand*2275 |
| SXH-five hundred | a thousand | 500 | four | four | one-30 | 2630*1140*2620 |
| SXH-one thousand | 2000 | one thousand | five.five | 5.five | -thirty | 3060*1440*2860 |
| SXH-1500 | 3000 | 1500 | 7.five | 7.five | -thirty | 3700*2000*2970 |
| SXH-2000 | 4000 | 2000 | eight.5 | 8.5 | -thirty | 3800*2500*3500 |
two. Twin-Screw Extruder
2.1 Substantial torque & Substantial Pace Rotation Twin-Screw Extruder:
Main Functions:
*Total Gearbox from expert EPT maker, low sounds, tough longevity
*Higher screw velocity, higher shearing, quick discharge
*Independent lube oil cooling system style
*Torque limiter to safeguard the generate train
*Suitable for reclaim powder, unique powder creation
*Split design and style of barrel and liner inserts for simple cleaning and maintainence
*Prime & Side feeding possibilities
*Other attributes same as typical sort extruder
Technical Parameters:
| Design | Potential (kg/h) | Screw Diameter (mm) | Screw Size (mm) | Screw Speed (r/min) | Main Motor (kw) | Feeder Motor (kw) | Heating Electrical power (kw) | Total Proportions (mm) |
| TSX-forty | eighty-260 | forty | 16D | -800 | eleven/fifteen/18.five | .55 | eight | 1850*700*1750 |
| TSX-fifty two | 150-450 | fifty two | 16D | -800 | 22/30/37 | .75 | ten | 2700*900*2200 |
| TSX-65 | 400-a thousand | sixty five | 16D | -800 | forty five/fifty five/75 | 1.one | 12 | 2900*one thousand*2400 |
| TSX-75 | 800-1200 | seventy five | 16D | -800 | 75/ninety | 1.five | sixteen | 3100*1200*2500 |
| TSX-eighty five | 1200-1800 | eighty five | 16D | -800 | ninety/110 | two.2 | 20 | 3700*1500*2900 |
2.2 Conventional Type Co-Rotation Parallel Twin Screw Extruder
Functions:
*Robust shearing, simple cleansing
*Exact vehicle temperature management, large cooling & heating exchagne
*Hinged clamshell sort barrel opening, segmented liners for simple changing and value saving
*Feeder effortless assembly & disassembly, inner construction to stay away from agglomeration
*Configurable screw utilized for defferent powder formulas
*Screw and barrel undertake particular resources like Cr12MoV, CPM, and so forth., substantial donning resisting
*Really gearbox with low sound dB amount
*Torque limiter to safeguard the travel prepare
*Low vitality use
Complex Parameters:
| Model | Capacity (kg/h) | Screw Diameter (mm) | Screw Length | Screw Speed (r/min) | Primary Motor (kw) | Feeder Motor (kw) | HeatinHOW IT Works: MECHANICAL FRICTION TORQUE LIMITER Mach III friction torque limiters are always engaged and transmit a fixed volume of torque from a single component to another. They protect the push and driven parts from harm in the function of a torque overload by slipping, so that the volume of torque transmitted from a single part to the other does not exceed the pre-established volume. Friction torque limiters are meant for momentary overload only and will proceed to slip right up until the supply of the torque overload is cleared, or the device is shut down. Consequently, a implies of detecting the torque overload must be in place.g Electrical power (kw) | General Proportions (mm) |
| SLJ-forty | 80-220 | 40 | 16D | -five hundred | 11/15/eighteen.5 | .fifty five | 4 | 1800*600*1700 |
| SLJ-fifty | one hundred fifty-300 | 50 | 16D | -five hundred | 22/30 | .75 | eight | 2600*seven-hundred*2000 |
| SLJ-fifty five | 300-400 | 55 | 16D | -500 | 30/37 | .seventy five | 8 | 2700*900*2300 |
| SLJ-sixty | 400-600 | sixty | 16D | -500 | forty five | one.one | 12 | 2750*one thousand*2350 |
| SLJ-seventy five | 600-800 | seventy five | 16D | -500 | fifty five | one.five | 12 | 2900*1100*2400 |
| SLJ-80 | 800-1200 | 80 | 16D | -500 | 75/ninety | 2.2 | twenty | 3700*800*2800 |
2.3 Lab Sort Extruder
Complex Parameters:
| Design | Capacity (kg/h) | Screw Diameter (mm) | Screw Length | Screw Speed (r/min) | Principal Motor (kw) | Feeder Motor (kw) | Heating Electrical power (kw) | All round Proportions (mm) |
| TSX-20 | .2-10 | 22 | 16D | -600 | two.2-four | .1 | two | 1600*three hundred*850 |
| SLJ-30 | 1-thirty | 30 | 16D | -500 | 3-5.five | .18 | three.two | 1430*550*1300 |
| SLJ-32 | forty-eighty | 32 | 16D | -five hundred | 7.5/11 | .twenty five | three.2 | 1600*five hundred*1500 |
three Cooling Belt
three.1 Drinking water Cooled Cooling Belt with Flaker:
Attributes:
Constant quality imported metal belt
Base cooling water spraying technique, installed heating and cooling system
Geared up with manual system to steer clear of deforming
Better cooling consequence, higher efficient productivity
Couple of upkeep and effortless cleaning
Chips thickness and roller speed adjustable
Crusher with finger pin and teeth sort
Minimized cross contamination, straightforward operation
Technical Parameters:
| Product | Roller Dia. (mm) | Belt Width (mm) | Belt Duration (mm) | Push Motor (kw) | Capacity (kg/h) | Cooling Method | All round Dimensions (mm) |
| GDY-406 | 220 | 600 | 4000 | one.five | 200-four hundred | Cooled Drinking water | 4000*750*1600 |
| GDY-508 | 325 | 800 | 5000 | 3 | four hundred-500 | Cooled Water | 5000*900*1800 |
| GDY-510 | 325 | 1000 | 5000 | three | five hundred-seven-hundred | Cooled Drinking water | 5000*1100*1900 |
| GDY-610 | 440 | a thousand | 6000 | four | 600-800 | Cooled Water | 6000*1100*1900 |
| GDY-612 | 440 | 1200 | 6000 | four | seven-hundred-900 | Cooled Water | 6000*1400*1900 |
| GDY-712 | 600 | one thousand | 7000 | 5.five | 900-1200 | Cooled Drinking water | 7000*1400*2000 |
3.2 Air Cooled Type Caterpillar Cooling Belt with Flaker:
Attributes:
Stainless steel produced caterpillar, air cooling
Flake chips thichness and conveying pace adjustable
Affordable layout for cooling rollers inside, professional surface area remedy to keep away from drinking water lea ept and rust
Installed with simplified air conditioning device
Protected operation, like unexpected emergency button, clockwise and counter-clockwise rotation.
Technical Parameters:
| Model | Roller Dia. (mm) | Belt Width (mm) | Belt Size (mm) | Drive Motor (kw) | Blower Motor (kw) | Ability (kg/h) | Cooling Manner | Overall Proportions (mm) |
| JFY-204 | a hundred and sixty/160 | 400 | 2000 | .fifty five | two hundred-400 | thirty-one hundred | Chilled Drinking water&Air | 2000*450*900 |
| JFY-406 | 160/220 | 600 | 4000 | .seventy five | four hundred-five hundred | one hundred-220 | Chilled H2o&Air | 4000*850*950 |
| JFY-508 | a hundred and eighty/325 | 700 | 5000 | .seventy five | five hundred-seven-hundred | 220-400 | Chilled Water&Air | 5000*1050*1200 |
| JFY-510 | a hundred and eighty/325 | 800 | 5000 | one.1 | 600-800 | four hundred-five hundred | Chilled Drinking water&Air | 5000*1150*1200 |
| JFY-610 | 180/325 | 800 | 6000 | 1.1 | seven-hundred-900 | 500-700 | Chilled Drinking water&Air | 6000*1150*1200 |
| JFY-710 | 180/325 | one thousand | 6000 | one.five | 900-1200 | 600-900 | Chilled H2o&Air | 7000*1250*1450 |
| JFY-812 | 180/325 | 1000 | 7000 | two.2 | 900-1200 | 900-1200 | Chilled Water&Air | 8000*1650*1600 |
three.3 PU Kind Air Cooled Cooling Belt
Features:
Adjustable thichness and roller speed
Air cooled to avoid cross contamination
Roller and crusher outfitted with overload security
Higher efficiencies
One piece PU belt to faciliate easy cleansing and servicing
Compact style for restricted space
Technical Parameters:
| Design | Roll Dia. (mm) | Band Width (mm) | Band Length (mm) | Motor Energy (kw) | Throughput (kg/h) | Dimensions (mm) |
| PFY-104 | 156 | 400 | one thousand | one.one | 50 | one thousand*870*1050 |
| PFY-206 | 220 | 600 | 2000 | 1.1 | a hundred and fifty | 2000*1150*1100 |
| PFY-208 | 445 | 800 | 2000 | two.2 | 300 | 2000*1100*1100 |
| PFY-210 | 445 | 1000 | 2000 | 2.two | 500 | 2000*1300*1100 |
| PFY-310 | 622 | 1000 | 3000 | two.two | 800 | 2000*1300*1200 |
four ACM (Air Classifier Mill) Grinding Method
Characteristics:
Security in accordance with EU explosion resistant normal ATEX/PSR11
Reduced sounds design and style (from mill to fan technique)
Particle dimensions distribution adjustable on ask for
Mill body temperature and air consumption volume monitoring
Rotary sieve with exclusive layout and durable for mesh wear situation
Entire grinding system made for powder dust free
Concluded powder products with much more than 98 per cent
Higher output, easy procedure cleaning and upkeep
Complex Parameters:
| Product | Mill Motor kw | Rotor rpm | Classifier Motor | Classifier rpm | Enthusiast kw | Air cbm/h | Capacity kg/h | General dimensions mm |
| ACM-02 | two.two | 12000 | .37 | -3000 | 3 | 350 | 2-thirty | 1430*550*1300 |
| ACM-05 | 4 | 11000 | .75 | -3000 | 4 | 800 | thirty-80 | 2100*1000*2150 |
| ACM-10 | 7.5 | 7000 | 1.5 | -3000 | eleven | 2500 | 100-260 | 6200*1250*3200 |
| ACM-fifteen | eleven | 7000 | one.five | -3000 | 15 | 3000 | 200-350 | 6500*1300*3300 |
| ACM-twenty | 15 | 6600 | 2.2 | -3000 | 22 | 3500 | 300-four hundred | 7500*1300*3600 |
| ACM-thirty | 22 | 5500 | three | -3000 | 30 | 4500 | 400-550 | 7900*1500*3600 |
| ACM-forty | 30 | 4600 | five.5 | -3000 | 37 | 5500 | 600-800 | 8000*1700*3600 |
| ACM-fifty | 37 | 4000 | seven.5 | -3000 | 45 | 6500 | 1000-1200 | 9000*1900*3900 |
| ACM-sixty | forty five | 3500 | 7.five | -3000 | 55 | 8000 | 1200-1600 | 9000*2000*4000 |
Company:
Xihu (West Lake) Dis.solar is a leading producer in China of Powder Coating Creation Equipments, i.e. Mixers, Extruders, Cooling Belt and Air Classifier Mill. We inherit 30 a long time of activities in this ept and have exported to virtually thirty international locations and regions in the earlier ten many years, and earn widely very good reputations.
We passed CE certification acceptance and ATEX explosion resistant take a look at, etc. worldwide standards, we do know how to meet the diversified and custom-made manufactured requests of our customers.
Our eternal enterprise philosophy: consistant top quality, successful interaction, liable services.
The use of original gear manufacturer’s (OEM) portion numbers or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating solution use and compatibility. Our business and the detailed replacement components contained herein are not sponsored, authorized, or made by the OEM.
